Tools Q&A
Q: What is this product?
Q: 이 제품은?
A: This product is a tool used for repairing. It’s difficult to explain all the necessary techniques and other technical details related to using this tool. Therefore, I recommend this tool to people who have prior knowledge about it and can use it without help from others. I cannot comment on each individual use.
A: 이 제품은 수리를 위한 도구이며, 이 도구를 사용하는 데에 필요한 방법 및 기술적인 모든 부분을 알려드리기가 어렵습니다. 즉, 이런 제품을 원했고 다른 사람의 도움이 없이 사용할 수 있는 분들에게 추천합니다. 모든 케이스에 대해 설명하기가 어렵습니다.
Q: How do I connect it to the board?
Q: 보드에 어떻게 연결하나요?
A: The location of the J6100 Connector on the Logicboard is different for each board and, likewise, the direction of the connector is not all the same. Therefore, you must properly check the location and the direction of the J6100 Connector before connecting it to the board.
A: 로직보드에 있는 J6100 커넥터의 위치는 다르며 방향 또한 모두 동일하지 않습니다.
즉, 직접 J6100의 커넥터의 위치와 방향을 확인하고 연결해야 합니다.
Q: I got it connected but EFI-ROM is not detected. Is it broken?
Q: 제대로 연결은 하였으나 EFI-ROM 인식이 안되는데 고장 난 건가요?
A. There are several cases where this happens:
-
EFI-ROM(SPI-ROM) on the logicboard is broken; or
-
another SPI communication line connected to EFI-ROM(SPI-ROM) is malfunctioning; or
-
SPI programmer currently in use is broken; or
-
operating voltage of the SPI programmer currently in use is low.
A: 이런 경우 여러 케이스가 있습니다.
-
로직보드에 있는 EFI-ROM(SPI-ROM)이 고장이 난 경우
-
EFI-ROM(SPI-ROM)에 연결되어있는 다른 SPI 통신 라인이 오동작하는 경우
-
사용하는 SPI 프로그래머 고장인 경우
-
사용하는 SPI 프로그래머의 동작 전압이 낮은 경우